Directions for use

1. Make sure T-Tap drain is closed
2. Attach bag onto leg, either above or below knee with flutter valve at top.
3. Remove cap from entry port; connect entry port directly to catheter or tubing.
4. To empty bag hold bottom of bag steady and push T-Tap drain valve to open position.

for the price of $8.95 16oz/500ml

for the price of $8.95 34oz/1000ml

To clean your vinyl leg bag or night collection bag after use, remove tubing and leg straps and rinse the bag with clear water.

1. Use a solution of bleach and water (one ounce bleach to a quart of water) to remove stains and odor of urine from the bag and plastic tubing.
2. Fill the bag with solution, making sure there is no air in the bag, and let it soak for 20-30 minutes.
3. Rinse again with clear water and hang to dry.
4. Soak tubing in the same solution, then rinse it and hang it to dry.
5. Add about half a teaspoon of Ultra-Fresh® Odor Eliminator to the bag after you clean it.

Over time, mineral deposits from your urine will build up in the collection bag. These deposits will clog the one-way valve and block the flow of urine. To keep your bags, connectors, valves, and tubing clog-free, soak them every few days in a solution of vinegar and water (four ounces of vinegar to a quart of water). Let connectors, valves, tubes, and bag soak for 6-8 hours, and then rinse with clear water.